Tribesigns Solid Wood End Table – Full Installation Guide

This end table is thoughtfully constructed from premium rubber wood, ensuring exceptional durability and a warm, natural finish that complements a variety of interior styles. Its two-tier design provides generous storage and display space—perfect for keeping lamps, drinks, books, or everyday essentials neatly organized and always within reach. Whether placed beside a sofa, armchair, or bed, it serves as a functional and stylish addition to any living space.

• Premium Solid Wood Build – Crafted from durable rubber wood with a rich natural finish for long-lasting strength and timeless appeal.
• Two-Tier Storage Design – Spacious top for lamps, drinks, or décor; lower shelf keeps books and essentials neatly organized.
• Perfect Sofa Height – Stands at 23.62", pairing beautifully with most sofa styles for convenient everyday use.
• Safe & Smooth Finishing – Fade-resistant coating and rounded, hand-polished edges help protect children, pets, and furniture.
• Quick Assembly, Easy Care – Comes with all hardware and clear instructions; smooth surface wipes clean effortlessly.

To help you enjoy your new furniture as quickly and safely as possible, the following guide provides clear, step-by-step assembly instructions. Before you begin, please read through the entire manual and ensure all parts and hardware are accounted for.

In this step, you will prepare the top panel (①) and the lower shelf panel (③) for later assembly.

On each panel:

1. Insert and tighten A (M6×40mm connecting bolts) into the pre-drilled outer holes.
2. Insert C (M8×30mm metal dowels) into the remaining pre-drilled holes.

These connectors will lock into the side frames and beams in later steps.

• Place a support beam (②) against the bottom side of the lower shelf panel (③).
• Insert a cam lock (B) into the large round holes of the panel. Ensure the arrow or slot on the cam lock faces the metal dowel C.
• Turn the cam lock clockwise with the screwdriver until it grips firmly.

Repeat this process to attach the second support beam (②) to the top panel (①).

At this point, panels ① and ③ each have one beam securely connected beneath them.

Prepare the side frames for assembly:

• Insert A (connecting bolts) into the pre-drilled outer holes on each side frame (④ & ⑤).
• Insert C (metal dowels) into the remaining connector holes.

These will later lock into the cam locks installed on the beams and panels.

You will now connect panels ① and ③ (with beams attached) to the side frames (④ & ⑤).

1. Align the connecting bolts (A) on the frames with the cam lock holes on panels ① and ③.
2. Gently slide them together until the bolts fully insert into the round openings.
3. Insert cam locks (B) into the holes on the panel surfaces and turn clockwise to tighten around the bolts.
4. Strengthen the structure using E + F

• Insert #F into the hole.
• Using a screwdriver, rotate #F until its groove aligns with #E. Lock in place by turning #E clockwise.

This securely locks the lower shelf to the supporting crossbeam below.

Complete the installation of the top tabletop panel.

1. Insert F (barrel nuts) into the holes on the side frames. Rotate them to align the internal threads.
2. Insert E (long bolts) through the lower beam and into the barrel nuts.
3. Tighten both bolts securely using the included Allen key (D).

Carefully flip the table to its upright position.

Check the following:

• All cam locks (B) are fully tightened
• All bolts (E) are securely fastened
• The table stands level and stable

1. Check the parts list and confirm everything's there before starting assembly.
2. When assembling, put all parts on a soft, smooth surface like a carpet to avoid scratches.
3. Don't fully tighten screws until all parts are confirmed in place to avoid misalignment.

Your Tribesigns solid wood end table is ready to use.

We hope this guide made your assembly smooth and stress-free.

Read more:

How Tall Should an End Table Be? Expert Guide & FAQs

Best End Tables for Living Room 2025